ECE (Fall 2015) / (Spring 2016) / (Fall 2016)

Courses Curriculum offered to the undergraduate students of Dept of ECE:

Group I: Humanities
Existing Courses Proposed Courses
Course Code Course Title CreditHours Course Code Course Title CreditHours
HUM – 101 English I 3.0 HUM–101 English I 3.0
HUM – 102 English II 3.0 HUM– 102 English II 3.0
HUM – 111 Bangladesh Studies 3.0 HUM– 111 Bangladesh Studies 3.0
ECN – 101 Principles of Economics 3.0 ECN – 101 Principles of Economics 3.0
ACN – 201 Principles of Accounting 2.0 ACN – 201 Principles of Accounting 2.0
Sub Total 14.0 Sub Total 14.0
     
Group II: Mathematics and General Science
MTH – 101 Math I 3.0 MTH – 101 Differential and Integral Calculus 3.0
MTH – 103 Math II 3.0 MTH – 103 Geometry and Linear Algebra 3.0
MTH – 201 Math III 3.0 MTH – 201 Vector Analysis and Complex Variable 3.0
MTH – 203 Math IV 3.0 MTH – 203 Differential Equations, Laplace Transforms and Fourier Analysis 3.0
MTH – 301 Statistics and Probability 2.0 MTH – 301 Statistics and Probability 2.0
PHY – 101 Physics I 3.0 PHY – 101 Physics I 3.0
PHY – 102 Physics Lab 1.5 PHY – 102 Physics Lab 1.5
PHY – 103 Physics II 3.0 PHY – 103 Physics II 3.0
CSE – 101 Computer Fundamentals 3.0      
CSE – 102 Computer Fundamentals Lab 1.5      
      CHE – 101 Chemistry 3.0
      CHE – 102 Chemistry Lab 0.0
Sub Total 26.0 Sub Total 24.5
 
Group III: Core Courses
ECE – 101 Basic Electrical Engineering 3.0 ECE – 103 Electrical Circuits I 3.0
ECE – 102 Basic Electrical Engineering Lab 1.5 ECE – 104 Electrical Circuits I Lab 1.5
      ECE – 105 Electrical Circuits II 3.0
      ECE – 106 Electrical Circuits II Lab 1.5
CSE – 103 Computer Programming in C 3.0 CSE – 103 Computer Programming in C 3.0
CSE – 104 Computer Programming in C Lab 1.5 CSE – 104 Computer Programming in C Lab 1.5
CSE – 203 Object Oriented Programming 3.0 CSE – 203 Object Oriented Programming 3.0
CSE – 204 Object Oriented Programming Lab 1.5 CSE – 204 Object Oriented Programming Lab 1.5
CSE – 205 Data Structures 3.0      
CSE – 206 Data Structures Lab 1.5      
ECE – 205 Electronic Circuits I 3.0 ECE – 205 Electronic Circuits I 3.0
ECE – 206 Electronic Circuits I Lab 1.5 ECE – 206 Electronic Circuits I Lab 1.5
ECE – 207 Electrical Machines 3.0 ECE – 207 Electrical Machines 3.0
ECE – 208 Electrical Machines Lab 1.5 ECE – 208 Electrical Machines Lab 1.5
      ECE – 379 Solid State Devices 3.0
IPE – 393 Industrial Management 3.0 IPE – 393 Industrial Management 3.0
CSE – 209 Numerical Methods 3.0 CSE – 209 Numerical Methods 3.0
ECE – 350 Electronic Project 1.5 ECE – 370 Electronic Shop Practice 1.5
ECE – 210 Electronic Simulation 1.5 ECE – 210 Electronic Simulation 1.5
ECE – 367 Electronic Circuits II 4.0 ECE – 367 Electronic Circuits II 3.0
ECE – 368 Electronic Circuits II Lab 1.5 ECE – 368 Electronic Circuits II Lab 1.5
CSE – 231 Digital Logic Design 3.0 ECE – 211 Digital Electronics 3.0
CSE – 232 Digital Logic Design Lab 1.5 ECE – 212 Digital Electronics Lab 1.5
ECE – 477 Digital Electronics and Pulse Technique 3.0      
ECE – 478 Digital Electronics and Pulse Technique Lab 1.5      
ECE – 357 Measurement and Instrumentation 4.0 ECE – 357 Measurement and Instrumentation 3.0
      ECE – 358 Measurement and Instrumentation Lab 1.5
ECE – 355 Electromagnetic Fields and Waves 3.0 ECE – 355 Electromagnetic Fields and Waves 3.0
ECE – 359 Communication Systems 3.0 ECE – 361 Telecommunication Engineering 3.0
ECE – 360 Communication Systems Lab 1.5 ECE – 362 Telecommunication Engineering Lab 1.5
ECE – 377 Industrial and Power Electronics 3.0 ECE – 375 Power Electronics 3.0
ECE – 378 Industrial and Power Electronics Lab 1.5 ECE – 376 Power Electronics Lab 1.5
ECE – 353 Linear Circuits and Systems 4.0 ECE – 335 Signals and Communication Systems 3.0
CSE – 333 Microprocessors and Assembly Language 3.0 ECE – 325 Microprocessors and Interfacing 3.0
CSE – 334 Microprocessors and Assembly Language 1.5 ECE – 326 Microprocessors and Interfacing Lab 1.5
  Option I 3.0 ECE – 411 Control System Engineering 3.0
  Option I Lab 1.5 ECE – 412 Control System Engineering Lab 1.5
ECE – 371 Cellular Communication 3.0 ECE – 373 Mobile Cellular Communication 3.0
ECE – 372 Cellular Communication Lab 1.5 ECE – 374 Mobile Cellular Communication Lab 1.5
ECE – 421 Digital Communication 3.0 ECE – 421 Digital Communication 3.0
ECE – 422 Digital Communication Lab 1.5 ECE – 422 Digital Communication Lab 1.5
ECE – 465 Microwave Engineering 3.0 ECE – 465 Microwave Engineering 3.0
ECE – 466 Microwave Engineering Lab 1.5 ECE – 466 Microwave Engineering Lab 1.5
ECE – 471 Optical Fiber Communication 3.0 ECE – 471 Optical Fiber Communication 3.0
ECE – 472 Optical Fiber Communication Lab 1.5 ECE – 472 Optical Fiber Communication Lab 1.5
ECE – 479 VLSI Circuits 3.0 ECE – 479 VLSI Circuits 3.0
ECE – 480 VLSI Circuits Lab 1.5 ECE – 480 VLSI Circuits Lab 1.5
ECE – 457 Satellite Communication 3.0      
  Option II 3.0 ECE – 461 Digital Signal Processing 3.0
  Option II Lab 1.5 ECE – 462 Digital Signal Processing Lab 1.5
CSE – 327 Computer Network 3.0 CSE – 327 Computer Network 3.0
CSE – 328 Computer Network Lab 1.5 CSE – 328 Computer Network Lab 1.5
CVV – 100 Comprehensive Viva Voce – I 1.0      
CVV – 200 Comprehensive Viva Voce – II 1.0      
CVV – 300 Comprehensive Viva Voce – III 1.0      
CVV – 400 Comprehensive Viva Voce – IV 1.0 CVV – 400 Comprehensive Viva Voce – IV 1.0
ECE – 490 Project/Thesis 4.0 ECE – 490 Project/Thesis 4.0
Sub Total 123.0 Sub Total 113.0
 
Group IV: Elective Courses
Option I (Any One with Lab) Option (Any 4 Courses)
ECE – 411 Control System Engineering 3.0 ECE– 425 Optoelectronics 3.0
ECE – 412 Control System Engineering Lab 1.5 ECE– 457 Satellite Communication 3.0
CSE – 427 Computer Interfacing 3.0 ECE– 463 Antenna and Propagation 3.0
CSE – 428 Computer Interfacing Lab 1.5 ECE– 481 Biomedical Engineering 3.0
CSE – 455 Artificial Intelligence 3.0 ECE– 483 Renewable Energy 3.0
CSE – 456 Artificial Intelligence Lab 1.5 ECE – 485 Semiconductor Processing and Fabrication Technology 3.0
      CSE – 331 Computer Architecture 3.0
           
Option II (Any One with Lab)      
ECE – 461 Digital Signal Processing 3.0      
ECE – 462 Digital Signal Processing Lab 1.5      
ECE– 463 Antenna and Propagation 3.0      
ECE– 463 Antenna and Propagation Lab 1.5      
ECE – 467 Laser Technology 3.0      
ECE – 468 Laser Technology Lab 1.5      
ECE – 473 Microwave Theory and Technique 3.0      
ECE – 474 Microwave Theory and Technique Lab 1.5      
        Sub Total 12.0
  Grand Total 163.0   Grand Total 163.5
           
       
       

 

 

Course Offering (Day Program)

 

First Year First Semester

Course Code Course Title Credit Hours
HUM –101D Oral and Written Communication in English Language 3.0
PHY – 101 Mechanics, Waves, Optics, Heat  and Thermodynamics 3.0
MTH – 101D Differential and Integral Calculus 3.0
HUM – 111D Bangladesh Studies: History and Society of Bangladesh 3.0
ECE – 103 Electrical Circuits I 3.0
ECE – 104 Electrical Circuits I Lab 1.5
CHE – 101 Chemistry 3.0
CHE – 102 Chemistry Lab 0.0
  Subtotal 19.5

 

 

First Year Second Semester

Course Code Course Title Credit Hours
HUM – 103 Language Composition and Comprehension 3.0
PHY – 103 Electromagnetism and Modern Physics 3.0
PHY – 104 Physics Lab 1.5
MTH –103D Geometry and Linear Algebra 3.0
CSE – 103 Computer Programming in C 3.0
CSE – 104 Computer Programming in C Lab 1.5
ECE – 105 Electrical Circuits II 3.0
ECE – 106 Electrical Circuits II Lab 1.5
  Subtotal 19.5

 

 

Second Year First Semester

Course Code Course Title Credit Hours
MTH – 201D Vector Analysis and Complex Variable 3.0
ECE – 205 Electronic Circuits – I 3.0
ECE – 206 Electronic Circuits – I Lab 1.5
ACN – 201 Principles of Accounting 2.0
ECN – 101 Principles of Economics 3.0
CSE – 209 Numerical Methods 3.0
ECE – 210 Electronic Simulation 1.5
IPE – 393 Industrial Management 3.0
  Subtotal 20.0

 

Second Year Second Semester

Course Code Course Title Credit Hours
MTH – 203D Differential Equations, Laplace Transforms and Fourier Analysis 3.0
ECE – 367 Electronic Circuits II 3.0
ECE – 368 Electronic Circuits II Lab 1.5
ECE – 211 Digital Electronics 3.0
ECE – 212 Digital Electronics Lab 1.5
MTH – 301 Statistics and Probability 2.0
ECE – 207 Electrical Machine 3.0
ECE – 208 Electrical Machine Lab 1.5
CSE – 203 Object Oriented Programming 3.0
CSE – 204 Object Oriented Programming Lab 1.5
   Subtotal 23.0

 

 

 

Third Year First Semester

 

Course Code Course Title Credit Hours
ECE – 325 Microprocessors and Interfacing 3.0
ECE – 326 Microprocessors and Interfacing Lab 1.5
ECE – 361 Telecommunication Engineering 3.0
ECE – 362 Telecommunication Engineering Lab 1.5
ECE – 335 Signals and Communication Systems 3.0
ECE – 370 Electronic Shop Practice 1.5
ECE – 375 Power Electronics 3.0
ECE – 376 Power Electronics Lab 1.5
ECE – 379 Solid State Devices 3.0
  Subtotal 21.0

 

Third Year Second Semester

 

Course Code Course Title Credit Hours
CSE – 327 Computer Networks 3.0
CSE – 328 Computer Networks Lab 1.5
ECE – 355 Electromagnetic Fields and Waves 3.0
ECE – 357 Measurement and Instrumentations 3.0
ECE – 358 Measurement and Instrumentations Lab 1.5
ECE – 421 Digital Communication 3.0
ECE – 422 Digital Communication Lab 1.5
  (Option) 3.0
  Subtotal 19.5

 

 

 

 

 

Fourth Year First Semester

Course Code Course Title Credit Hours
ECE – 373 Mobile Cellular Communication 3.0
ECE – 374 Mobile Cellular Communication Lab 1.5
ECE – 465 Microwave Engineering 3.0
ECE – 466 Microwave Engineering Lab. 1.5
ECE – 411 Control System Engineering 3.0
ECE – 412 Control System Engineering Lab 1.5
ECE – 461 Digital Signal Processing 3.0
ECE – 462 Digital Signal Processing Lab 1.5
ECE – 490 Project/Thesis
  (Option) 3.0
  (Option) 3.0
  Subtotal 24.0

 

Fourth Year Second Semester

Course Code Course Title Credit Hours
ECE – 471 Optical Fiber Communication 3.0
ECE – 472 Optical Fiber Communication Lab 1.5
ECE – 479 VLSI Circuits 3.0
ECE – 480 VLSI Circuits Lab 1.5
CVV – 400 Comprehensive Viva Voce 1.0
ECE – 490 Project/Thesis 4.0
   (Option) 3.0
  Subtotal 17.0
     
  Grand Total 163.5

 

 

Course Offering (Evening Program)

First Year First Semester

Course Code Course Title Credit Hours
APE – 101 Academic and Professional English 3.0
PHY – 101E Physics for Engineering 3.0
PHY – 102E Physics Lab 1.5
MTH – 101 Geometry, Differential and Integral Calculus 3.0
CSE – 103 Computer Programming in C 3.0
CSE – 104 Computer Programming in C Lab 1.5
ECE – 103 Electrical Circuits I 3.0
ECE – 104 Electrical Circuits I Lab 1.5
CHM – 101 Chemistry 3.0
CHM – 102 Chemistry Lab 0.0
  Subtotal 22.5

 

First Year Second Semester

Course Code Course Title Credit Hours
MTH – 103 Linear Algebra, Complex Variable and Vector Analysis 3.0
ECE – 103 Electrical Circuits II 3.0
ECE – 104 Electrical Circuits II Lab 1.5
ECE – 211 Digital Electronics 3.0
ECE – 212 Digital Electronics Lab 1.5
ECE – 205 Electronic Circuits – I 3.0
ECE – 206 Electronic Circuits – I Lab 1.5
IPE – 393 Industrial Management 3.0
MTH – 301 Statistics and Probability 2.0
  Subtotal 21.5

 

Second Year First Semester

Course Code Course Title Credit Hours
CSE – 209 Numerical Methods 3.0
ECE – 325 Microprocessors and Interfacing 3.0
ECE – 326 Microprocessors and Interfacing Lab 1.5
ECE – 367 Electronic Circuits – II 3.0
ECE – 368 Electronic Circuits – II Lab 1.5
ECE – 355 Electromagnetic Fields and Waves 3.0
ECE – 207 Electrical Machines 3.0
ECE – 208 Electrical Machines Lab 1.5
  Subtotal 19.5

 

 

Second Year Second Semester

Course Code Course Title Credit Hours
MTH – 203 Differential Equations, Laplace Transforms and Fourier Analysis 3.0
ECE – 335 Signals and Communication Systems 3.0
ECE – 357 Measurement and Instrumentation 3.0
ECE – 358 Measurement and Instrumentation Lab 1.5
CSE – 203 Object Oriented Programming 3.0
CSE – 204 Object Oriented Programming lab 1.5
ECE – 362 Telecommunication Engineering Lab 1.5
ECE – 375 Power Electronics 3.0
ECE – 376 Power Electronics Lab 1.5
   Subtotal 24.0

 

 

Third Year First Semester

 

Course Code Course Title Credit Hours
ECE – 421 Digital Communication 3.0
ECE – 422 Digital Communication Lab 1.5
ECE – 411 Control System Engineering 3.0
ECE – 412 Control System Engineering Lab 1.5
ECE – 465 Microwave Engineering 3.0
ECE – 466 Microwave Engineering Lab 1.5
CSE – 327 Computer Networks 3.0
CSE – 328 Computer Networks Lab 1.5
ECE – 483 Renewable Energy 3.0
ECE – 485 Semiconductor Processing and Fabrication Technology 3.0
  Subtotal 24.0

 

Third Year Second Semester

 

Course Code Course Title Credit Hours
ECE – 373 Mobile Cellular Communication 3.0
ECE – 374 Mobile Cellular Communication Lab 1.5
ECE – 461 Digital Signal Processing 3.0
ECE – 462 Digital Signal Processing Lab 1.5
ECE – 481 Biomedical Engineering 3.0
ECE – 457 Satellite Communication 3.0
ECE – 471 Optical Fiber Communication 3.0
ECE – 472 Optical Fiber Communication Lab 1.5
ECE – 479 VLSI Circuits 3.0
ECE – 480 VLSI Circuits Lab 1.5
  Subtotal 24.0
     
ECE – 490 Thesis/Project 4.0
CVV – 492 Comprehensive Viva Voce 3.0
     
  Total Credits required for the degree 142.5

 

 

 

 

 

 

Detailed Syllabus

HUM-101:          English-1 (Oral and written Communication Skills)

3 Credits

Oral & written communication skills include communicative expressions for day to day activities, both for personal and professional requirement. Grammar items will mainly emphasize the use of articles, numbers, tense, modal verbs, pronouns, punctuation, etc. Sentence formation, question formation, transformation of sentence, simple passive voice construction, and conditionals will also be covered.

Books Recommended:

  1. Paragraph in English – Tibbits
  2. Exercise in Reading Comprehension – Tibbits
  3. Essential English Grammar – Ramon Murphy
  4. English Vocabulary in Use – Stuart
  5. English Vocabulary in Use – McCarthy
  6. Intermediate English Grammar – Ramon Murphy

APE-101: Academic and Professional English

3 Credits

Grammar: Use of articles, number, tense, modal verbs, pronouns, punctuation, sentence formation, question formation, transformation of sentence, simple-passive voice construction. Oral and written communication skills including communicative expressions for day to day activities. Comprehension. Paragraph, report and Curriculum Vitae writing.

Books Recommended:

  1. Paragraph in English – Tibbits
  2. Exercise in Reading Comprehension – Tibbits
  3. Essential English Grammar – Ramon Murphy
  4. English Vocabulary in Use – Stuart
  5. English Vocabulary in Use – McCarthy
  6. Intermediate English Grammar – Ramon Murphy

 

HUM-103:      English II: Language Composition and Comprehension

3 credits

This course purports to make the student well up in composition and comprehension of English language used in formal write ups like articles, essays and treatises. Here text will be given for comprehension, exercises of writing essays, paragraphs and reports will be done and construction of proper sentences expressing formal ideas will be taught. Sufficient exercises of translation and re-translations will be included.

 

Books Recommended:

  1. Paragraph in English – Tibbits
  2. Exercise in Reading Comprehension – Tibbits
  3. Essential English Grammar – Ramon Murphy
  4. English Vocabulary in Use – Stuart
  5. English Vocabulary in Use – McCarthy
  6. Intermediate English Grammar – Ramon Murphy

 

 

HUM-111:    Bangladesh Studies

3 Credits

 

Part I: Society and Culture

The Sociological Perspective, Primary Concepts, Factors of social life, Social Structure and Process, Social Institutions, Culture and Civilization, City and Country, Social Change, Problems of Society, Social Problems of Bangladesh, Urbanization Process and its impact on Bangladesh Society will be covered.

 

Part II: Bangladesh History

The land, the geographical factor, and the people of Bangladesh. Historical perspectives: Ancient Bengal, Early Medieval Bengal, Late Medieval Bengal, Beginning of British rule in Bengal, Nineteenth century Bengali Renaissance and area of social and religious reforms, Partition of Bengal and its annulment, Bengal politics in the 1930’s and 1940’s, Elections of 1936-37, Pakistan movement, Partition of Bengal (1947), Language Movement (1952), Movement for autonomy, 6-point and 11-point programmes, the 1970 election, Genocide in East Pakistan, The Liberation War, the emergence of Bangladesh as a sovereign independent state in 1971.

Books Recommended:

  1. Bangladesh Encyclopedia (English Version)
  2. History of Bengal (English Version) – K. Ali
  3. History of Bengal (English Version) – Majumder
  4. Economy of Bangladesh (Economic Journal)

 

MTH-101: Differential and Integral Calculus (Day / Evening)

3 Credits

 

Differential Calculus:  Real  number System. Relations and functions, Functions of single variable, their Domain, Range, Graphs, Limit, Continuity and Differentiability. Successive Differentiation, Leibnitz’s theorem, Rolle’s theorem, Mean value  theorem, Taylor’s theorem, Maclaurin’s  theorem, Langrange’s and Cauchy’s forms  of Remainder. Expansion of Function  in Taylor’s and Maclaurin’s Series. Maximum and Minimum Values of Function. Evaluation of Indeterminate forms of limit, L’ Hospital’s Rule. Tangent and Normal. Curvature, Radius of Curvature, Centre of Curvature. Functions of more than one variable, Limit, Continuity, Differentiability, Partial Derivatives, Euler’s Theorem. Jacobians.

Integral Calculus: Indefinite Integrals and its definition. Methods of Integration (Integration by substitution, Integration by parts, Integration by successive reduction). Fundamental theorem of Integral calculus. Definite Integral and its properties. Definite Integral as the limit of a sum. Improper Integrals, Beta and Gamma Function, Its application in evaluating Integrals. Evaluation of Arc length, Areas, Surfaces of Revolution, Volumes of solids of Revolution, Multiple  Integrals.

Books Recommended:

  1. Calculus – Howard Anton; 10th Edition; John Willy and Sons.
  2. Differential Calculus – B. C. Das & B. N. Mukharjee; 54th Edition; U. N. Dhur & Sons PTL.
  3. Integral Calculus – B. C. Das & B. N. Mukharjee; 54th Edition; U. N. Dhur & Sons PTL.
  4. A Text Book on Differential Calculus – Mohammad, Bhattacharjee & Latif, 4th Edition, 2014; S. Chakravarty, Gonith Prokashan.
  5. A Text Book on Integral Calculus – Mohammad, Bhattacharjee & Latif; 4th Edition, 2014; S. Chakravarty, Gonith Prokashan.

 

MTH-103: Geometry and Linear Algebra (Day)

3 Credits

 

Geometry:

Two dimensional Geometry: Transformation of Co-ordinates. Pair of straight lines, General Equation of Second Degree, Circle, Parabola, Ellipse and Hyperbola. Three Dimensional Geometry: Three Dimensional Co-ordinates, Direction Cosines and Direction Ratios. Plane and Straight line.

Linear Algebra: Determinant and properties of Determinants, Matrix, Types of matrices, Matrix operations, Laws of matrix Algebra, Invertible matrices, System of Linear equations (homogeneous and non-homogeneous) and their solution. Elementary row and Column operations and Row-reduced echelon matrices, Rank of matrices. Vectors in Rn and Cn   , Inner product, Norm and Distance in Rn and C. Vector Spaces, Subspace, Linear combination of vectors, Linear dependence and independence of vectors. Basis and Dimension of vector spaces. Inner product spaces, Orthogonality and Orthonormal sets, Eigen values and Eigen vectors, diagonalization, Cayley-Hamilton  theorem and its application.

 

Books recommended:

  1. Analytical Geometry of Conic Section – J. M. Kar.
  2. An Elementary Treatise on Co-ordinate Geometry of three dimensions – J. T. Bell; Macmillan India Ltd.
  3. A Text Book on Co-ordinate Geometry – Rahman & Bhattacharjee; 12th Edition, 2014; S. Chakravarty, Gonith Prokashan.
  4. Schaum’s Outline Series of the Theory and Problems on Linear Algebra – Seymour Lipschutz; 3rd Edition; McGraw Hill Book Company.
  5. Linear Algebra with Applications – R. Antone.
  6. Linear Algebra – Dewan Abdul Quddus; Latest Edition; Titash Publications.
  7. Linear Algebra – Saikia.

MTH-201: Vector Analysis and Complex Variable (Day)

3 Credits

 

Vector Analysis: Vector Algebra – Vectors in three dimensional space, Algebra of Vectors, Rectangular Components, Addition, Subtraction and Scalar multiplication, Scalar and Vector product of two vectors. Scalar and Vector triple product. Application in Geometry.

Vector Calculus – Limit, Continuity and Differentiability of Scalar and Vector point functions.  Scalar and Vector field. Gradient, Divergence and Curl of point functions. Vector Integration, Line, Surface and Volume Integrals. Green’s theorem, Gauss’s theorem, Stoke’s theorem.

Complex Variable: Field of Complex numbers, D’Moivre’s theorem and its applications. Limit and Continuity of complex functions, Derivatives, Analytic function, Harmonic function, Cauchy-Rieman equation. Line Integral of Complex functions. Cauchy’s  Integral theorem and Cauchy’s  Integral formula. Lioville’s theorem, Taylors and Laurent’s theorem, Singularity Residue, Cauchy’s Residue theorem. Contour Integration. Bilinear transformation. Mapping of Elementary functions. Conformal mapping.

Book Recommended:

  1. Schaum’s Outline Series of the Theory and  Problems on Vector Analysis – Murray R. Spiegel; SI (Metric Edition); McGraw Hill Book Company.
  2. Schaum’s Outline Series of the Theory and Problems on Complex Variable – Murray R. Spiegel; 2nd Edition; McGraw Hill Book Company.
  3. Functions of a Complex Variable – Dewan Abdul Quddus; Latest Edition; Titash Publications.

MTH-203: Differential Equations, Laplace Transforms and Fourier Analysis (Day)

3 Credits                                                                                                                                                                

 

Differential Equation: Formation of Differential equation, Degree and Order of differential equation, Complete and Particular solution. Ordinary differential equation – Solution of ordinary differential equation of first order and first degree (special forms). Linear differential equation with constant coefficients. Homogeneous linear differential equation. Solution of differential equation by the method of Variation of parameters. Solution of linear differential equations in series by Frobenius method. Bessel’s function and Legendre’s Polynomials and their properties. Simultaneous equation of the form    = = . Partial differential equation – Lagrange’s linear equation, Equation of linear and non-linear first order standard forms, Charpit’s method.

Laplace Transforms: Definition, Laplace transforms of some elementary functions, sufficient conditions for existence of Laplace transforms, Inverse Laplace transforms, Laplace transforms of derivatives, Unit step function, Periodic function, Some special theorems on Laplace transforms, Partial fraction, Solution of differential equations by Laplace transforms, Evaluation of Improper Integrals.

Fourier Analysis: Fourier series (Real and complex form). Finite transforms, Fourier Integrals, Fourier transforms and application in solving boundary value problems.

Books Recommended:

  1. Differential Equations – H. T. H. Piaggio; 1st Indian Edition, 1985, S. K. Jain for CBS Publishers.
  2. A Text Book on Integral Calculus with Differential Equations – Mohammad,  Bhattacharjee & Latif, 4th Edition, 2010; S. Chakravarty, Gonith Prokashon.
  3. Schaum’s Outline Series of the Theory and Problems on Laplace Transforms – Murray R. Spiegel; Revised Edition, 2003; McGraw Hill Book Company.
  4. Differential Equation – Md. Abu Eusuf; Latest Edition; Abdullah Al Mashud Publisher.

 

MTH – 101: Geometry, Differential and Integral Calculus (Evening)

3.0 Credits                                                                                            

 

Geometry:

Two dimensional Geometry: Transformation of Coordinates, General Equation of Second Degree, pair of straight lines, Circle, Parabola, Ellipse and Hyperbola. Three Dimensional Geometry: Three Dimensional Co-ordinates, Direction Cosines and Direction Ratios. Plane and Straight line.

Differential Calculus:  Real  number System. Functions of single variable, its Graphs, Limit, Continuity and Differentiability. Successive Differentiation, Leibnitz’s theorem, Rolle’s theorem, Mean value  theorem, Taylor’s theorem, Maclaurin’s  theorem, Langrange’s and Cauchy’s forms  of Remainder. Expansion of Function in Taylor’s and Maclaurin’s Series. Maximum and Minimum Values of Function. Evaluation of Indeterminate forms of limit, L’ Hospital’s Rule. Tangent and Normal. Functions of more than one variable, Limit, Continuity, Differentiability, Partial Derivatives, Euler’s Theorem. Jacobians.

Integral Calculus: Indefinite Integrals and its definition. Methods of Integration (Integration by substitution, Integration by parts, Integration by successive reduction). Fundamental theorem of Integral calculus. Definite Integral and its properties. Definite Integral as the limit of a sum. Improper Integrals, Beta and Gamma Function, Its application in evaluating Integrals. Evaluation of Arc length, Areas, Surfaces of Revolution, Volumes of solids of Revolution, Multiple  Integrals.

Books Recommended:

  1. Analytical Geometry of Conic Section – J. M. Kar.
  2. A Text Book on Co-ordinate Geometry – Rahman & Bhattacharjee; Chakravarty, Gonith Prokashon.
  3. Calculus with Analytic Geometry – Thomas and Finne
  4. Calculus – Howard Anton; 10th Edition; John Willy and Sons.
  5. Differential Calculus – B. C. Das & B. N. Mukharjee; 54th Edition; U. N. Dhur & Sons PTL.
  6. Integral Calculus – B. C. Das & B. N. Mukharjee; 54th Edition; U. N. Dhur & Sons PTL.

 

MTH-103: Linear Algebra, Vector Analysis and Complex Variable (Evening)

3 Credits

Linear Algebra: Matrix, Types of matrices, Matrix operations, Laws of matrix Algebra, Invertible matrices, System of Linear equations (homogeneous and non-homogeneous) and their solution. Elementary row and Column operations and Row-reduced echelon matrices, Different types of matrices, Rank of matrices. Eigen values and Eigen vectors.

 

Vector Analysis: Vector Algebra – Vectors in three dimensional space, Algebra of Vectors, Rectangular components, Addition and Scalor multiplication, Scalor and Vector product of two Vectors, Scalor and Vector triple product. Vector Calculus – Vector differentiation and  Integration. Gradient, Divergence and Curl. Green’s theorem, Gauss’s theorem, Stoke’s theorem.

Complex Variable: Limit. Continuity and differentiability of complex functions. Analytic function, Harmonic function, Cauchy–Rieman equation. Complex Integration. Cauchy’s integral theorem and Cauchy’s Integral formula. Lioville’s theorem. Taylor’s and Laurent’s theorems. Singularities. Residue, Cauchy’s Residue theorem. Contour Integration.

Books Recommended:

  1. Schaum’s Outline Series of the Theory and Problems on Linear Algebra – Seymour Lipschutz; 3rd Edition; McGraw Hill Book Company.
  2. Linear Algebra with Applications – R. Antone.
  3. Schaum’s Outline Series of the Theory and Problems on Vector Analysis – Murray R. Spiegel; SI (Metric Edition); McGraw Hill Book Company.
  4. Schaum’s Outline Series of the Theory and Problems on Complex Variable – Murray R. Spiegel; McGraw Hill Book Company.
  5. Functions of a Complex Variable – Dewan Abdul Quddus, Latest Edition, Titash Publications.

MTH-203: Differential Equations, Laplace Transforms and Fourier Analysis (Evening)

3 Credits

 

Differential Equation: Formation, Degree and Order of differential equation, Complete and Particular solution.  Solution of ordinary differential equation of first order and first degree (special forms), Linear differential equation with constant co-efficients. Homogeneous linear differential equation. Solution of equation by the method of Variation of Parameters.  Solution of Linear differential equation in series by Frobenius method. Solution of Simultaneous equations of the form     = = .

Laplace Transforms: Definition, Laplace transforms of some elementary functions, Sufficient conditions for existence of Laplace Transforms, Inverse Laplace transforms, Laplace transforms of derivatives, Unit step function, Periodic function, some special theorems on Laplace transforms, Partial fraction. Solution of differential equations by Laplace transforms. Evaluation of Improper Integrals.

Fourier Analysis: Fourier series (Real and complex form), Finite transforms, Fourier Integrals, Fourier Transforms and application in solving boundary value problems.

Books Recommended:

  1. Differential Equation – H. T. H. Piaggio, 1st Indian Edition, 1985, S. K. Jain for CBS Publishers
  2. A Text Book on Integral Calculus with Differential Equation – Mohammad,  Bhattacharjee & Latif, 4th Edition, Gonith Prokashon.
  3. Schaum’s Outline Series of the Theory and Problems on Laplace Transforms – Murray R. Spiegel , Revised Edition,  2003, McGraw Hill Book Company.
  4. Differential Equations – Md. Abu Eusuf, Latest Edition, Abdullah Al Mashud Publisher.

 

 

PHY-101: Physics-I: Mechanics, Properties of Matter, Waves, Optics, Heat and Thermodynamics

3 Credits

 

Mechanics: Measurements, Motion in One Dimension, Motion in a Plane, Particle Dynamics, Work & Energy, Circular Motion, Simple Harmonic Motion, Rotation of Rigid Bodies, Central Force, Structure of Matter, Mechanical  Properties of Materials. Properties of Matter: Elasticity, Stresses & Strains, Young’s Modulus, Bulk Modulus, Rigidity Modulus, Elastic Limit, Poisson’s Ratio, Relation between Elastic Constants, Bending of Beams. Fluid Motion, Equation of Continuity, Bernoulli’s Theorem, Viscosity, Stokes’ Law. Surface Energy & Surface Tension, Capillarity, Determination of Surface Tension by Different Methods.

Waves: Wave Motion & Propagation, Simple Harmonic Motion, Vibration Modes, Forced Vibrations, Vibration in Strings & Columns, Sound Wave & Its Velocity, Doppler Effect, Elastic Waves, Ultrasonics, Practical Applications. Optics: Theories of Light, Huygen’s Principle, Electromagnetic Waves, Velocity of Light, Reflection, Refraction, Lenses, Interference, Diffraction, Polarization. Heat & Thermodynamics : Temperature and Zeroth Law of Thermodynamics, Calorimetry, Thermal Equilibrium & Thermal Expansion, First Law of Thermodynamics, Specific Heat, Heat Capacities, Equation of State, Change of Phase, Heat Transfer, Second Law of Thermodynamics, Carnot Cycle, Efficiency, Entropy, Kinetic Theory of Gases.

Books Recommended:

  1. Fundamentals of Physics (Part I) – Haliday, Resnic and Walker
  2. Modern Physics – Bernstein
  3. Concept of Modern Physics – Beiser
  4. Fundamentals of Optics – Brizlal
  5. Optics – Ghotok
  6. Heat and Thermodynamics – Brizlal
  7. University Physics with Modern Physics – Young
  8. Essential University Physics Vol. I – Wolfson

PHY-103: Electricity and Magnetism & Modern Physics

3 Credits

 

Electrostatics, Electric Charge, Coulomb’s Law, Electric Field & Electric Potential, Electric Flux Density, Gauss’s Law, Capacitors and Dielectrics, Steady Current, Ohm’s Law, Magnetostatics, Magnetic Field, Biot-Savart Law, Ampere’s Law, Electromagnetic Induction, Faraday’s Law, Lenz’s Law, Self Inductance & Mutual Inductance, Magnetic Properties of Matter, Permeability, Susceptibility, Diamagnetism, Paramagnetism & Ferromagnetism, Maxwell’s Equations of Electromagnetic Waves, Waves in Conducting & Non-Conducting Media, Total Internal Reflection, Transmission along Wave Guides.

Special Theory of Relativity, Length Contraction & Time Dilation, Mass-Energy Relation, Photo Electric Effect, Quantum Theory, X-rays and X-ray Diffraction, Compton Effect, Dual Nature of Matter & Radiation, Atomic Structure, Nuclear Dimensions, Electron Orbits, Atomic Spectra, Bohr Atom, Radioactive Decay, Half-Life, a, b and g Rays, Isotopes, Nuclear Binding Energy, Fundamentals of Solid State Physics, Lasers, Holography.

Books Recommended:

  1. Fundamentals of Physics (Part II) – Haliday, Resnic and Walker
  2. Modern Physics – Bernstein
  3. Concept of Modern Physics – Beiser
  4. Fundamentals of Optics – Brizlal
  5. Optics – Ghotok
  6. Heat and Thermodynamics – Brizlal
  7. University Physics with Modern Physics – Young
  8. Essential University Physics Vol. I – Wolfson

PHY–102: Physics Lab

1.5 Credits

Laboratory works based on PHY 101 and PHY 103

 

PHY-101E: Physics for Engineering (Evening)

3.0 Credits

Properties of matter: Elasticity, Stress and Strain, Young’s Modulus, Surface Tension.

Heat & Thermodynamics: Heat, Temperature, Zeroth Law of  Thermodynamics, Thermal Equilibrium, Seebeck Effect, Reversible and Irreversible Processes, First and Second law of Thermodynamics, Heat Engine, Carnot Cycle.

Electromagnetism: Electric charge, Charge Density, Coulomb’s and Ohm’s law, Electric field and Electrical Potential, Electric dipole, Electric flux, Gauss’s law and its application, Capacitance, Magnetic field, Biot-Savert law, Ampere’s law and its application, Electromagnetic Induction, Faraday’s law, Lenz’s law, Self Inductance and Mutual Inductance.

Optics: Nature and Propagation of light, Reflection and Refraction of light, Total Internal Reflection, Interference, Diffraction, Dispersion, Polarization.

Modern Physics: Theory of Relativity, Length Contraction and Time Dilation, Mass-Energy Relation, Compton Effect, Photoelectric Effect, Quantum Theory, Atomic structure, X-ray Diffraction, Atomic Spectra, Electron Orbital Wavelength, Bohr radius, Radioactivity, de Broglie theory, Nuclear Fission and Fusion.

 

Books Recommended:

  1. Fundamentals of Physics (Part I) – Haliday, Resnic and Walker
  2. Modern Physics – Bernstein
  3. Concept of Modern Physics – Beiser
  4. Fundamentals of Optics – Brizlal
  5. Optics – Ghotok
  6. Heat and Thermodynamics – Brizlal
  7. University Physics with Modern Physics – Young
  8. Essential University Physics Vol. I – Wolfson

PHY–102E: Physics Lab

1.5 Credits

Laboratory works based on PHY-101E

 

CHE-101: Chemistry

3 Credits

 

Atomic and Molecular Structure: Atomic Orbital: Hydrogen atom and many electron atoms, The periodic table of elements, Atomic properties and the periodic table, Chemical properties of s-, p-, d-, f- block elements, The origin of bonding forces, covalent versus bonding, Detailed consideration of Covalent bonding, bonding in some representative molecules.

Acids and Bases: Acid-Base equilibrium and pH scale in terms of activities, Acid-Base titration, Acid-Base indicators, Buffers, Henderson-Hasselbach approximation useful in biology application.

Electrochemistry: Introductory topics, Oxidation-Reduction reactions, The electrochemical cell, The Nernst equation, The measurement of cell e.m.f.

The rates of chemical reactions: Experimental rate laws, Elementary reactions, Kinetics and mechanisms.

Processes and process variables: Mass and volume, Flow rate, Chemical composition, Pressure, Temperature.

Material Balances: Process classification, Balances, Material balance calculations, balances on multiple unit processes, Balances on reactive systems and processes. Phase rule, Phase diagram of mono component system.

Energy and energy balances: Energy balances on closed systems, Energy balances on open systems at steady state, Energy balance procedures, mechanical energy balances.

Books Recommended:

  1. Physical Chemistry – Peter Atkins and Julio de Paula
  2. Modern Chemistry – Raymond E. Davis
  3. Physical Chemistry – Robert J. Silbey, Robert A. Alberty and Moungi G. Bawendi
  4. Introductory Chemistry a Foundation – Steven S. Zumdahl
  5. Inorganic Chemistry – Catherine Housecroft and Alan G. Sharpe

 

CHE–102: Chemistry Lab

0.0 Credits

Laboratory works based on CHE – 101

 

 

ECE – 103 Electrical Circuits I

3 Credits

 

Fundamental electrical concepts, Kirchoff’s Laws, Equivalent resistance. Electrical circuits: Series circuits, parallel circuits, series-parallel networks. Network analysis: Source conversion, Star/Delta conversion, Branch-current method, Mesh analysis, Nodal analysis. Network theorems: Superposition theorem, Thevenin’s theorem, Norton’s theorem, Maximum Power Transfer theorem, Reciprocity theorem. Capacitors and inductors, series and parallel combination of inductors and capacitors. Responses of RL and RC circuit: Natural and step responses. Inductors

Magnetic quantities and variables: Flux, permeability and reluctance, magnetic field strength, magnetic potential, flux density, magnetization curve. Laws in magnetic circuits: Ohm’s law and Ampere’s circuital law. Magnetic circuits: Series, parallel and series-parallel circuits.

Books Recommended:

  1. Introductory Circuit Analysis – R . L . Boylestad
  2. Introduction to Electrical Engineering – R .P. Ward
  3. Electrical Technology (Volume 1) – B . L . Theraja A. K. Theraja

 

ECE – 104: Electrical Circuits I Lab

1.5 credits

Laboratory works based on ECE – 101

ECE-105: Electrical Circuits II

Credit: 3.0

 

Sinusoidal Alternating Waveforms: Definitions, phase relations, Instantaneous value, Average value, Effective (rms) value. Phasor algebra and complex quantities, Series, parallel and series-parallel ac networks. Power: Apparent power, Reactive power, Power triangle, Power factor correction. Pulse waveforms and the RC response.

Analysis of Single phase AC circuit: Series and parallel RL, RC and RLC circuit, nodal and mesh analysis, application of network theorems in AC circuits. Circuits with non-sinusoidal excitations, transients in AC circuits, passive filters. Resonance in AC Circuits: Series and parallel resonance. Q of a circuit, Admittance. Impedance matching and maximum power transfer. Poly-Phase Circuit: Three phase supply, balanced and unbalanced poly phase circuit, power calculation.

Books Recommended:

  1. Introductory circuit Analysis – R. L. Boylestad
  2. Alternating Current Circuit –R. M. Kerchner , G. F. Corcoran
  3. Electrical Circuit –James W. Nilson
  4. Electrical technology (Volume 1) –B. L. Theraja K. Theraja

ECE-106:  Electrical Circuits II Lab

Credit: 1.5

Laboratory works based on ECE 103.

CSE-103:      Computer Programming in C

3 Credits

Programming language: Basic concept; overview of programming languages, C-language: Preliminaries; Elements of C; program constructs; variables and data types in C; Input and output; character and formatted I/O; Arithmetic expressions and assignment statements; loops and nested loops; Decision making’ Arrays; Functions; Arguments and Local Variables; Calling functions and arrays; Recursion and recursive functions; structures within structure; Files; File functions for sequential and Random I/O. Pointers, Pointers and Structures; Pointers and functions; Pointer and arrays; Operations on pointers; Pointer and memory addresses; Operations on bits; Bit operation; Bit field; Advanced features; Standard and Library functions.

Books Recommended:

  1. The C Programming Language – Kernighan and Ritchie
  2. Teach Yourself C – H. Schield

CSE-104: Computer Programming in C Lab

1.5 Credits

Laboratory works based on CSE-103

ECE – 205: Electronic Circuit I

3.0 Credits

Semiconductor Diode: Introduction to semiconductor devices, p-type and n-type semiconductors, principle of p-n junction diode,  forward and reverse biased conditions, I-V Characteristics of a Diode, Simplified DC and AC Diode Models, Dynamic Resistance and Capacitance, load line analysis, half wave and full wave rectifiers, filter, clipping and clamping  circuits. Optical Diodes, Solar Cell, Zener diode and its applications and voltage regulator circuits.

Bipolar Junction Transistor (BJT): Principle of operation of BJT. Transistor circuit configurations (CE, CB and CC configurations) and their input, output and transfer characteristics. BJT biasing circuits and Thermal Stabilization, DC Load Line and Operating Point. Low frequency AC equivalent circuits, configurations, voltage, current and power gain, input and output impedance with resistive load. Transistor as an Amplifier, Transistor as a Switch. Low and high frequency response of CE amplifiers. BJTs at Low Frequencies: Hybrid h Model, H-Parameters, Analysis of a Transistor Amplifier Circuit using h-parameters, High Input Resistance Transistor Circuits; BJTs at High Frequencies: Hybrid pi-model. CE Short Circuit Current Gain, Current Gain with Resistive Load. Harmonic distortion in CE amplifiers.

Introduction of Field Effect Transistor (FET), Junction Field Effect Transistor (JFET), Metal Oxide Semiconductor Field Effect Transistors (MOSFET): physical construction, classification, basic equations and various types of I-V characteristics. Basic FET amplifiers. Use of FET as voltage controlled switch and resistors.

 

Books Recommended:

  1. Electronic Devices – Thomas L. Floyd
  2. Electronics Device and Circuit – R. L. Boylested
  3. Integrated Electronics –Jacob Millman and Christos C. Halkias.
  4. Electronics Principle – Malvino
  5. Micro Electronics – Jacob Millman, Arvin Garbel.
  6. Solid State Electronics Devices – Ben G. Streetman
  7. Electronics Technology – B. L. Theraja

ECE – 206: Electronic Circuits I Lab

1.5 Credits

Laboratory works based on ECE – 206.

 

ECE – 367: Electronic Circuits II

3.0 Credits

 

Feedback Amplifier: Classification, Feedback Concept, Effect of Feedback on Transfer Gain, Loops; Gain, Amplifier Characteristics, Types of Feedback. Negative Feedback Amplifiers and their Applications.

Sinusoidal Oscillators: Conditions of self Oscillation, Phase Shift Oscillation; Colpitt’s and Hartley, Wien Bridge and Crystal Oscillators.

Active Filters: Basic Filter Responses, Filter Response Characteristics, Active Low Pass, High Pass, Band Pass, and Band Stop Filters;

Power Amplifiers: Untuned Power Amplifiers; Class A, Push Pull Class B, Complementary Symmetry Class B, Class AB, Darlington Pair. Tuned Voltage and Power (Class B and Class C) Amplifiers, Wide Band Amplifier, Mixers.

Operational Amplifiers (OP Amps): Introduction to Op-Amps, Differential and Common mode gain. Common Mode Rejection Ratio (CMRR). Frequency response of Op-Amps and slew rate, Noise and Frequency Compensation. Inverting and Non-inverting Amplifier, Phase Inverter, Scale Changer, Integrating and Differentiating Circuits. Comparators, Comparators and Applications; Adder or Summing Amplifier, Voltage to Current and Current to Voltage Converter, Voltage Follower. Electronic Analog Computation, Capacitors, Differential, Instrumentation and Bridge Amplifiers. Phase Locked Loop (PLL) circuit and Voltage Controlled Oscillator, multi-vibrators, Schmitt Trigger circuit and wave shaping using op-amp, 555 timer and other linear ICs.

Books Recommended:

  1. Electronic Devices – Thomas L. Floyd
  2. Electronics Device and circuit – R. L. Boylested
  3. Integrated Electronics – Jacob Millman and Christos C. Halkias
  4. Electronics Principle – Malvino
  5. Micro Electronics – Jacob Millman, Arvin Garbel
  6. Electronics Devices : A Design Approach – Ali Aminian and Marian Kazimierczuk
  7. Solid State Electronics Devices – Ben G. Streetman

 

ECE – 368: Electronic Circuits II Lab

1.5 Credits

Laboratory works based on ECE – 367

 

ECE – 369: Solid State Devices

3.0 Credits

Introduction: Classification of solids, crystal lattice and structures, Miller Indices, Electronic model of semiconductor and solids. Valance and conduction bands Concept of holes. Introductory quantum mechanics, wave equation, uncertainty principle, postulates, Schrodinger time independent equation. Energy band diagrams of semiconductor.

Semiconductors in equilibrium: Energy bands, intrinsic and extrinsic Semiconductors, Fermi levels, electron and hole concentrations, temperature dependence of carrier concentrations and invariance of Fermi level. Carrier transport processes and excess carriers: Drift and diffusion, generation and recombination of excess, built-in-field, Einstein relations, continuity and diffusion equations for holes and electrons and quasi-fermi level. PN junction: Basic structure, equilibrium conditions, contact potential, equilibrium Fermi level, space charge, non-equilibrium condition, forward and reverse bias, carrier injection, minority carrier currents, transient and AC conditions, time variation of stored charge, reverse recovery transient and capacitance. Bipolar Junction Transistor: Basic principle of pnp and npn transistors, emitter efficiency, base transport factor and current gain, diffusion equation in the base terminal currents, coupled-diode model and charge control analysis, Ebers-Moll equations and circuit synthesis. Metal-semiconductor junction: Energy band diagram of metal semiconductor junctions, rectifying and ohmic contacts. MOS structure: MOS capacitor, energy band diagrams and flat band voltage, threshold voltage and control of threshold voltage, static C-V characteristics, qualitative theory of MOSFET operation, body effect and current-voltage relationship of a MOSFET. Junction Field-Effect-transistor:  Introduction, qualitative theory of operation, pinch-off voltage and current-voltage relationship.

Books Recommended:

  1. Electrical Engineering Materials – A. J. Dekker
  2. Introduction to Solid State Physics – Charles Kittel
  3. Principles of Electronic Materials and Devices – S. O. Kasap
  4. Solid State Electronic Devices – Ben Streetman and Sanjay Banerjee
  5. Fundamentals of Solid State Electronics – Chih-Tang Sah
  6. Semiconductor Device: Physics and Technology – S. M. Sze
  7. Electrical Engineering Materials – T. K. Basak

ECE – 207:   Electrical Machine   

3 Credits      

 

DC Generator: Principles. Construction, classification, armature winding, voltage build up, armature relations and commutation, performance and testing.

DC Motor: Operation, types, speed-torque characteristics, methods of speed control, Transformer: Principle, construction, cooling, vector diagrams and voltage regulation, equivalent circuits, performance and testing.

Induction Motor: Principle of operation. Constructional details, equivalent circuits, speed –torque relation, losses and efficiency, circle diagram.

Synchronous Generators: General constructional outline of synchronous generators, Air gap flux and voltage expressions, armature winding. Alternator regulation. Determination of machine parameters from tests. Vector diagrams, losses and efficiency.

Synchronous Motors: General constructional features., theory of operation, motor terminal characteristics, mathematical analysis, vector diagrams, V-curves, motor tests, losses, efficiency and starting.

 

Books Recommended:

  1. Direct and Alternating Current Machinery – Rosen Blut
  2. Electrical Machines – S. K. Bhattacharjee
  3. Electrical Machines – Nagarth and Kothari
  4. Functional and Sub Functional Horse Power Electric Motor – Joseph E. Martin

ECE – 208:   Electrical Machine Lab

1.5 Credits

Laboratory works based on ECE – 207

IPE – 393: Industrial Management

3 Credits

 

Introduction, evolution, management functions. Organization and environment.

Organization: theory and structure, coordination, span of control, authority delegation, groups, committee and task force, manpower planning.

Personnel management: scope, importance, need hierarchy, motivation, job redesign, leadership, participative management, training, performance appraisal, wages & incentives, informal groups, organizational change and conflict.

Cost and Financial management: Elements of costs of products depreciation, breakeven analysis, Investment Analysis, Benefit cost analysis.

Management accounting: Cost planning and control; budget & budgetary control, Development planning process.

Marketing Management: Concepts, strategy, sales promotion, patent laws.

Technology Management; Management of innovation and changes, technology life cycle.

Books Recommended:

  1. Operation Management – Krajewski, Ritzman
  2. Operation Management for Competitiye (Edition 11) – Chase, Jaccob, Aquilano

 

 

ECE – 350: Electronic Shop Practice

1.5 Credits    

 

CSE-209: Numerical Methods

3 Credits

 

Errors and Accuracy. Iterative process: Solution of f(x) = 0, existence and convergence of a root, convergence of the iterative method, geometrical representation, Aitken’s D2– process of acceleration. System of Linear Equations. Solution of Non-Linear equations. Finite Differences and Interpolation. Finite Difference Interpolation. Numerical Differentiation. Numerical Integration. Differential Equations.

Books Recommended:

  1. Numerical methods for Engineers –Steven C. Chapra
  2. Numerical methods Analysis –James B. Scarborugh
  3. Introductory methods of Numerical Analysis – S. S. Sastry

 

ECE – 335: Signals and Communication Systems

3 Credits

 

Classification of signals and systems: Signals classification, basic operations on signals, elementary signals, representation of signals using impulse functions; system classification.

Spectral Analysis: Fourier series, the sampling function, response of a linear system, normalized power in Fourier expansion, power spectral density, the Fourier transform, convolution, Parvesal’s theorem, correlation between waveforms and autocorrelation.

Random Variables and Processes: Probability, cumulative distribution function, probability density function, Tchebycheff’s inequality, the Gaussian probability density, the error function, the Rayleigh probability density, correlation random variables, the central limit theorem, random processes, autocorrelation, power spectral density of a sequence of random pulses, power spectral density of digital data, effect of rudimentary filters of digital data, the complimentary error function.

Noise: Some sources of noise, characteristics of of various noises, and SNR, a frequency-domain representation of noise, spectral components of noise, response of narrow band filter to noise, effect of a filter on the power spectral density of noise, superposition of noises, mixing involving noise, linear filtering, noise bandwidth, quadrature components of noise, power spectral density of nct and nst, probability density of nct and nst and their time derivatives.

Communication System and Noise Calculations: Resistor noise, multiple resistor noise sources, network with reactive elements, an example, available power, noise temperature, two ports, noise bandwidth, effective input-noise

temperature, noise figure and equivalent noise temperature of a cascade, an example of a receiving system, antennas, system calculation.

Books Recommended:

  1. Communication Systems – Simon Haykin
  2. Signals and systems- Simon Haykin and Barry Van Veen
  3. Principles of Communication Systems – Herbert Taub and Donald L. Schilling

 

 

ECE – 355: Electromagnetic Fields and Waves

3 Credits

 

Review of vector Analysis. Electrostatics: Coulomb’s Law, force electric filed intensity, electrical flux density. Gauss theorem with application, electrostatic potential, boundary conditions, method of images, Laplace’s and Poisson’s equations, energy of an electrostatic system, conductor and dielectrics.

Magneto-statics; Concept of magnetic field, Ampere’s Law, Biot-Savart law, vector magnetic potential, energy of magneto static system, mechanical forces and torques in electric and magnetic fields, Curvilinear co-ordinates. Rectangular, cylindrical and spherical coordinates, solutions to static field problems.

Graphical field mapping with applications, solution to Laplace’s equations. Rectangular, cylindrical and spherical harmonics with applications.

Maxwell’s equations: Their derivations, continuity of charges, concepts of displacement current: Boundary conditions for time varying systems, Potentials used with varying charges and currents. Retarded potentials. Maxwell’s equations in different coordinate systems.

Relation between circuit theory and field theory: Circuit concepts and the derivation from the field equations. High frequency circuit concepts, circuit radiation resistance. Skin effect and circuit impedance. Concept of good and perfect conductors and dielectrics. Current distribution in various types of conductors, depth of penetration, internal impedance, power loops, calculation of inductance and capacitance.

Books Recommended:

  1. Field and Wave Electromagnetic – David K. Cheng
  2. Field & Wave in Communication Electronics – J. R. Whinnery
  3. Field & Wave in Communication Electronics – Simon Ramo

ECE – 357: Measurement and Instrumentations

3 Credits

 

Introduction:  Applications, functional elements of a measurement system and classification of instruments. Ammeter, Voltmeter and extension of instrument ranges.  Measurement of electrical quantities: Resistance, Capacitance and Inductance measurement, Current and Voltage measurement, Power and Energy measurement. Localization of cable fault, Magnetic measurement, ballistic galvanometer, high voltage measurement. Transducers: Mechanical, Electrical and Optical  transducer. Measurement of non-electrical quantities: Radiation, Temperature, Pressure, Flow, Level, Strain, Force and Torque measurement.  Electronic measuring instruments: Oscilloscope, Digital multi meters, DMM, statistical measurement, Spectrum analyzer. Computerized Instrumentation: Data acquisition, loggers and recorders.

Books Recommended:

  1. Electrical and Electronics Measurement and Instrumentation – A. K. Sawhney
  2. Introduction to measurement and Instrumentation – Hellfrick, Cooper
  3. Electrical Technology (Vol. 11) – B. L. Theraja

ECE – 358: Measurement and Instrumentations Lab

1.5 Credits    

Laboratory works based on ECE – 358

 

ECE – 325: Microprocessors and Interfacing

3 Credits

Microprocessors: Introduction to microprocessors. Intel 8086 microprocessor, architecture, addressing modes, instruction set, assembly language programming, interrupts and stack.

Interfacing: memory, I/O, programmable peripheral interface (PPI), programmable timer, serial communication interface, programmable interrupt controller, direct memory access (DMA), keyboard and display interface, RS-232, USB, RS-422 and RS-485, IEEE-488.

Microcontrollers: Introduction to microcontrollers and embedded system, PIC microcontrollers, architecture, PIC programming in C, I/O programming, hardware connection and ROM loaders.

Book Recommended:

  1. Microprocessors and Interfacing- Douglas V. Hall
  2. Microprocessor and Microcomputer Based System Design –Mohammad Rafiquzzaman
  3. Microprocessors – Harunur Rashid
  4. Microcomputer Systems: 8086/8088 Family – Y. Liu and G. A. Gibson
  5. The Intel Microprocessors – Bary B. Brey
  6. PIC Microcontroller and Embedded Systems – Ali Mazidi, Rolin McKinlay, Danny Causey
  7. The 8088 and 8086 Microprocessors – Walter A. Triebel and Avtar Singh

ECE – 326: Microprocessors and Interfacing Lab

1.5 Credits    

Laboratory works based on ECE – 325

 

 

 

ECE – 361:   Telecommunication Engineering

3 Credits

 

Telephony: Elements of communication systems, introduction to telephone system, exchanges, numbering, switching principles; Subscriber’s apparatus, Dialing and signaling; Types of signaling – different tones. Basics of switching system: Strowger switching, crossbar switching, electronic space division switching, time division switching, FDM, TDM, STS and TST, combination switching, Digital signal hierarchies in telephone systems – DS0, DS1, DS3, E1, E2, E3 etc., Stored Program Control (SPC), Software architecture, enhanced services, two-stage network, three-stage network, n-stage network. Principles of common control, touch tone dial telephone, Crosspoint technology, No. 1 ESS, Japanese D-10, Metaconta. Subscriber loop systems, switching hierarchy and routing, transmission plan, transmission systems, numbering plan, charging plan; signaling techniques, in-channel signaling, common channel signaling, Overview of SS7 architecture.

Modulation: Necessity of Modulation, Types of Modulation, Amplitude Modulation (AM) and Demodulation, Frequency Modulation (FM) and Demodulation, PLL, Super heterodyne receiver, Phase Modulation (PM) and Demodulation. Introduction to radio wave propagation methods.

Introduction to Television (TV) Engineering: Scanning and Synchronizing, Composite Video Signal, Video Modulation, Sound Modulation, Reception Technique of Vestigial Sideband Signal, Basic Operation of a TV Camera, Television Transmitters and Receivers, Color TV principles, The Luminance and Color Difference Signals, NTSC, PAL and SECAM Encoders, The PAL Decoder Principles, The Picture Tubes and types of Drives used to Reproduce the Color. TV studio design. Digital Television and Video: Video Digitization formats – the 4:2:2 formats, 4:2:0 format, Source Intermediate Format (SIF), Common Intermediate Format (CIF), General compression principles – Run Length Coding, Discrete Cosine Transform (DCT) compression technique, MPEG-1, MPEG-2.

Books Recommended:

  1. Communication Systems – Simon Haykin
  2. Telecommunication Switching Systems and Networks – T. Viswanathan
  3. Communication Systems – John G. Proakis
  4. Basic Television and Video System – B. Grob
  5. Monochrome and Colour Television – Gulati
  6. Radio Engineering – G. K. Mithal

ECE – 362:  Telecommunication Engineering Lab

1.5 Credits    

Laboratory works based on ECE – 361

 

ECE – 373:   Mobile Cellular Communication 

3 Credits

Introduction to Cellular Communication; Modern cellular system (1G Analog cellular, 2G Digital Cellular, 2.5 G Cellular System; 3G Wireless System; 4G Wireless System; i) Radio Propagation Technique, Free space Propagation; Two Ray model, Multipath Fading & Doppler. ii) Modulated Carrier Transmission, GMSK, QPSK iii) Diversity Technique: Frequency & Space Diversity, iv) Coding Technique: Block Coding, Convolution Coding, v) Speech coding, Channel coding, Equalizer, Frequency Hopping, Interleaving; Wireless Network Operation: i) Cellular Concept, Cell Fundamentals, Traffic Engineering, ii) Capacity Expansion Technique: Frequency Reuse, Cell Splitting, Sectoring, Lee’s Micro cell Method, Overlaid Concept. ; GSM Technology: i) Introduction, GSM Phases, GSM System Architecture, GSM Components, ii) GSM Traffic Handling: Registration, Call Establishment, Traffic Cases, iii) GSM Network Interfaces: Air Interface, A-bis Interface, A Interface, iv) GPRS & EDGE; CDMA Technology: Spread Spectrum, IS-95 Forward Channel, IS-95 Reverse Channel, Power Control, Handoff, W-CDMA & CDMA 2000, OFDM.

Books Recommended:

  1. Mobile Cellular Telecommunication –William C. Y. Lee
  2. Mobile Communication –Jochen Schiller
  3. Wireless Communication : Principles and Practices –Theodore S. Rappaport

 

ECE – 374:   Mobile Cellular Communication Lab

1.5 Credits   

Laboratory works based on ECE – 373

 

ECE – 379:   Power Electronics

3 Credits

 

Introduction to power electronic devices: Thyristor, SCR, BJT, MOSFET, IGBT, GTO, DIAC, TRIAC, SUS, UJT and PUJT.

Introduction to triggering: UJT relaxation oscillator, phase control circuit, PUT relaxation oscillator, pulse transformer.

DC-DC Converter: Choppers, step-down, step-up choppers, Zero Voltage Switching (ZVS), Zero Current Switching (ZCS).

Regulated Power Supplies: Buck, boost, buckboost and Cuk regulators, switch mode power supply.

Inverters: Single phase inverters, over current protection, output voltage control, PWM, SPWM, three phase inverters, resonant pulse inverters.

Motor Drives: DC motor drives, AC motor drives, speed control of AC motor, variable frequency converter, stepper motor drive circuit, brushless DC motor drive.

Industrial Heating: Resistive heating, High frequency heating, Induction heating, Dielectric heating and applications, Closed loop control system.

PLC: Introduction to PLC, Controllers, Hardware, Internal architecture, Programming, Testing, debugging, Commercial PLC.

Books Recommended:

  1. Power Electronics – H. Rashid
  2. Principle of power Electronics –Kassakian
  3. Industrial Electronics and Robotics – Schuller and McNamee
  4. Power and Industrial Electronics – G. K. Mithal
  5. Power Electronics System: Theory and Design – Agarwal
  6. Introduction to PLCs: A beginner’s guide to Programmable Logic Controllers – Elvin Pérez Adrover

 

ECE – 380:   Power Electronics Lab

1.5 Credits   

Laboratory works based on ECE – 379

 

ECE – 421:   Digital Communication

3 Credits

 

Introduction to modulation techniques: Pulse modulation; pulse amplitude modulation, pulse width modulation and pulse position modulation. Pulse code modulation; quantization, Delta modulation. TDM, FDM, OOK, FSK, PSK, QPSK; Representation of noise; threshold effects in PCM and FM. Probability of error for pulse systems, concepts of channel coding and capacity. Asynchronous and synchronous communications. Hardware interfaces, multiplexers, concentrators and buffers. Spread spectrum signals and systems.

Books Recommended:

  1. Digital Communication – John G. Proakis
  2. Digital Communication – Bernard Sklar
  3. Introduction to Digital Communication – Roger L. Peterson
  4. Digital Communication – Prof. N. Sarker
  5. Communication System – Simon Haykin

ECE – 422:   Digital Communication Lab

1.5 Credits

Laboratory works based on ECE – 421

ECE – 457:   Satellite Communication

3 Credits 

 

Elements of Satellite Communication, Satellite orbits-orbit fundamental, Orbital period and speed, Angle of inclination & elevation, Azimuth, Station keeping Attitude control, Satellite launching freq allocation. Satellite communication system, Earth station, Satellite link design, Modulation and muse technique for satellite link, Multiple Access. Error control for satellite link. Factors that have influence or satellite link design. Satellite spread spectrum communication, VSAT, Mobile Satellite Networks. Satellite Television; Network distribution and direct broadcasting.

Books Recommended:

  1. Satellite Communications – Dennis Roddy
  2. Electronics Communication – Dennis Roddy, John Coolen
  3. Satellite Communication Engineering – Michalle A. Kolawole
  4. Satellite Communication – Timothy Pratt, Charles Bostian and Jeremy Allnutt

 

ECE – 465: Microwave Engineering

3 Credits

 

Transmission lines: H.F. transmission lines, Smith chart, Impedance matching techniques and applications, E.M. propagation, reflection and refraction. Waveguide: Wave guides; Parallel plane, Rectangular, Coaxial wave guides, wave guide components, cavity resonators. Microwave tubes: Transit time effects, Velocity modulation, space charge wave, Klystron amplifier, Multicavity Klystron amplifier, Reflex Klystron oscillator. Magnetron. Traveling Wave Tube (TWT) amplifier. Backward Wave Oscillator (BWO). Antennas: Introduction to antennas, antennas and radiation, Hertzian dipole, Long straight antennas; analysis, radiation patterns, Rhombic and Slot antenna. Frequency independent and log periodic antennas, Antenna arrays, array design.

Books Recommended:

  1. Microwave Devices and Circuits –Samuel Y. Liao
  2. Microwave Engineering –David M. Pozer

ECE – 466: Microwave Engineering Lab. 

1.5 credits  

Laboratory works based on ECE – 465

 

ECE – 471: Optical Fiber Communication

3 Credits

 

Introduction to optical fiber communication; Optical fibers; structure, step-index and graded – index fibers, modes of propagation, modal theory for circular wave guide, d modal equations, wave guide equations, power flow in optical fibers. Signal degradation in optical fibers: fiber attenuation., distortion in optical wave guides, dispersions in fibers, mode coupling. Optical sources: light emitting diode (LED) and semiconductor laser diode (SLD) – structures, internal quantum efficiencies, modulation capability, transient response, power bandwidth product, modal noise, temperature effects and reliability considerations. Digital transmitter design with LASER diode. Photo detectors: p-I-n and avalanche photo detectors (APDs) principles of operations, structures, photo detector noise sources, detector response time, detector responsively and photodiode materials.

Optical modulation and detection schemes; direct detection, coherent detection. Direct detection receiver; configuration, receiver operation, receiver noises, receiver sensitivity calculation, performance curves and design of receiver pre amplifier. Effect of laser phase noise on receiver performance. Introduction to heterodyne optical receiver. Transmission link analysis; point – to – point links – system configuration, link power budget, rise time budget. Data buses; star and T-coupler data buses. Local area networks applied to single-mode fibre-optic communication. Line coding: NRZ, RZ, Manchester code (MC) and block codes. Introduction to wavelength division multiplexing (WDM) and optical Frequency division multiplexing (OFDM) transmission schemes.

Books Recommended:

  1. Optical Fiber Communications – John M. Senior
  2. Optical Fiber Communications – Keiser Gred
  3. Optical Fiber Communications – Palais Joseph

 

ECE – 472: Optical Fiber Communication Lab

1.5 Credits

Laboratory works based on ECE – 471

 

ECE – 211: Digital Electronics

3 Credits

 

Introduction: Digital and Analog systems. Number Systems and codes: Decimal, binary octal and hexadecimal number systems. 1’s complement and 2’s complement; addition and subtraction in different bases, subtraction using complements. Binary codes, Binary Coded Decimal (BCD), Excess-3, Gray, Alphanumeric codes. Error detection and correction code. Boolean Algebra and Logic Gates: Boolean algebra, logic gates, Boolean function, De Morgan’s theorems, standard and canonical forms. Simplification of Boolean functions: Karnaugh map, don’t care combination, minimization in SOP form using K-map, minimization in POS form using K-map. Combinational Logic Circuits: Design procedure, half adder, full adder, half subtractor, full subtractor. Combinational logic: Binary parallel adder, BCD adder; encoder and decoder; multiplexer and demultiplexer.

Flip-Flops: SR, JK, T and D type flip-flops, their truth tables; master slave flip-flop; edge triggered flip-flop; asynchronous inputs. Sequential circuits: Introduction to sequential circuits; analysis of clocked sequential circuits; state reduction and assignment; Flip-Flop excitation tables; Registers: Classification; register with parallel load; shift register, bidirectional shift register with parallel load and their applications. Counters: Classification; binary ripple counter; BCD ripple counter; binary up/down counter; binary counter with parallel load; timing sequence; ring counter and Johnson counter. Memory units: Classification and characteristics of memory; memory organization and operation; Introduction to PLA and FPGA. Introduction to Digital ICs and Logic Families: Diode Logic gates; Resistor transistor logic (RTL); Diode transistor logic (DTL); Transistor-Transistor Logic (TTL); Emitter Coupled Logic (ECL) MOS Logic and CMOS logic. Converters: Different types of Digital to Analog converter (DAC) and Analog to Digital converters (ADC) with their applications.

Books Recommended:

  1. Digital Logic and Computer Design – M. Morris Mano
  2. Digital Systems – R. J. Tocci
  3. Digital Fundamentals – T. Floyd
  4. Modern Digital Electronics – R. P. Jain
  5. Digital Electronic Circuits and Systems – V. K. Puri

 

 

ECE – 212: Digital Electronics Lab

1.5 Credits

Laboratory works based on ECE – 211

ECE – 479: VLSI Circuits

3 Credits

Overview of the design methodology; top-down design approach. Technology trends and design styles. Brief review of MOS transistor theory; nMOS and pMOS transistors, threshold voltage, body effect, design equations and V-I characteristics. Latch-up problem. MOS transistor as a switch; pass transistors and transmission gates. nMOS inverter characteristics. CMOS inverter characteristics; influence of n/p ratio on transfer characteristics and noise margin. CMOS processing technologies; design-fabrication interface, layers of abstraction, CMOS design rules. CMOS circuit characteristics and performance estimation; resistance and capacitance. Rise and fall times, delay gate transistor sizing, power consumption. CMOS logic design; logic structures, electrical and physical design of logic gates, clocking strategies, I/O structures.

Structured design methods; design styles, automated synthesis, circuit extraction, simulation and design rule checking (DRC). Design examples. CMOS subsystem design; adders and related functions, multipliers, memory systems, data paths, programmable logic arrays (PLAs). Field programmable gate arrays (FPGAs). VLSI testing; fault models, design for testability (DFT) – ad hoc testing, structured DFT, self-test and built-in test.

Books Recommended:

  1. Basic VLSI Design –Douglas A. Pucknell, Kamran Eshraghian
  2. VLSI Technology –S. M. Sze
  3. Introduction to VLSI Systems –C. A. Mead and L. A. Conway

ECE – 480: VLSI Circuits Lab

1.5 Credits

Laboratory works based on ECE – 479

 

ECE – 481: Biomedical Engineering

3 Credits

 

Biomedical Instrumentation: hazards and safety measures in biomedical applications, electrodes, electrocardiography (ECG), electroencephalography (EEG), X-Ray machine, computer aided tomography (CAT), Electrical Impedance Tomography (EIT), Focused Impedance Measurement (FIM), Ultrasonic Imaging System, LASER applications in biomedical field, Magnetic Resonance Imaging (MRI).

Blood flow meter, blood cell counters, pacemakers. Medical image processing: Degradation model, algebraic approach of image restoration, inverse filtering, detection of discontinuities, region-oriented segmentation, threshold, image compression.

Books Recommended:

  1. Handbook ofBiomedical Instrumentation – Khandpur
  2. Digital Image Processing – Rafael C. Gonzalez and Richard E. Woods, Pearson Education Asia.

ECE – 483: Renewable Energy      

3 Credits

                                                                               

Introduction to Renewable Energy Sources: Statistics regarding solar radiation and wind speed isolation, geographical distribution. Introduction to solar thermal conversion and solar collectors.

Radiation characteristics of materials: Absorptance, Emittance, Reflectance and Selective Surfaces, Modes of heat transfer. Solar Collectors: Flat plate collectors, Concentrating collectors, Solar distillation, Solar energy systems for process heating, Power generation and refrigeration, Performance and optimum design, Solar thermal modeling. Solar Photovoltaic Energy Conversion: Solar cell fundamental, Basic principle, Types of solar cells, PN junction as photovoltaic cell, Heterojunction, Schottky barrier junction, Fabrication of solar cell, Effect of environment on solar cells, (effect of irradiance once, and effect of temperature), Effect of shading, Thin film solar cell, Multiple sun solar cells, Fabrication of photovoltaic modules and panels, Dimension of cells, Packing efficiency of cells in modules, Characterization of cells and modules. Other Non-conventional Energy Options: Wind, Geothermal, OTEC, Wave energy, Biomass, MHD, Chemical energy, Fuel cell and Nuclear fusion.

Power conditioning of Photovoltaic System: Batteries, inverters, maximum power trrackers, energy system without battery, energy storage in battery, PV – Grid interconnection with battery storage, energy system with diesel backup and battery storage. Design of a PV system: Calculation of array size, selection of modules of arrays, calculation of battery capacity. Wind Energy: Wind turbine, tubes, operational characteristics, cut-in and cut-out speed, control, grid interfacing, AC-DC-AC link.

Books Recommended:

  1. Renewable Energy: Power for a Sustainable Future – Godfrey Boyle
  2. Renewable Energy – Bent Sorensen
  3. Renewable Energy Sources and Methods – Anne Maczulak
  4. Fundamentals of Renewable Energy Processes – Aldo Da Rosa

 

ECE – 463: Antennas and Propagation

3 Credits

Definitions, antenna as an aperture; Arrays of point sources; Review of dipoles, loop and thin linear antennas. Helical antenna, biconical and spheroidal antennas. Internal-equation methods, current distribution; Self and mutual impedances; Arrays; design and synthesis; Reflector type antennas. Babiner’s principle and complementary antennas. Application of reaction concept and variation principles in antennas and propagation; Frequency independent antennas. Scattering and diffraction, selected topics in microwave antennas. Antenna measurements. Application of broadcasting, microwave links, satellite communications and radio astronomy.

Books Recommended:

  1. Electromagnetic Fields and Waves – D. K. Cheng,
  2. Antenna Theory: Analysis and Design – Constantine A. Balanis,
  3. Antenna and Wave Propagation – K. D. Prasad

 

 

ECE – 485: Stochastic Theory of Communication

3 Credits

Probability and random variables. Distribution and density functions and conditional probability. Expectation: moments and characteristic functions. Transformation of a random variable. Vector random variables. Joint distribution and density. Independence. Sums of random variables. Random Processes. Correlation functions. Process measurements. Gaussian and Poisson random processes. Noise models. Stationarity and Ergodicity. Spectral Estimation. Correlation and power spectrum. Cross spectral densities. Response of linear systems to random inputs. Introduction to discrete time processes, Mean-square error estimation, Detection and linear filtering. Discrete time Markov chain, Continuous time Markov chain, Birth-death process in queuing problems. Introduction to queuing theory, Network of queues, Queuing models: M/M/1, M/M/K, M/G/1, M/G/K, G/M/I and G/M/K queuing models, Application of queuing models in communication engineering.

Books Recommended:

  1. Introduction to Probability Models –  Sheldon M. Ross
  2. Introduction to Queing Theory – Robert B Cooper

 

 

ECE – 485: Semiconductor Processing and Fabrication Technology

3.0 Credits

 

Physics of semiconductors: Electronic motion in periodic lattice, Energy bands, Brillouin zones, and reciprocal lattice, lattice mattering.

Semiconductor Materials: Intrinsic and extrinsic semiconductor and compounds, purification of Ge and Si,

preparation of single crystals and wafer, process chemicals, states of matter, phase diagram, crystalline materials, crystal orientation. Concept of clean room.

Crystal growth technology: Czochralski method, solution growth, solgel method, solar evaporation method, organic semiconductors, traveling heater method, zone melting, polysilicon and amorphous silicon deposition, group III-V and II-V semiconductors, SOS and SOI.

Epitaxial growth: Epitaxial silicon, vapor phase epitaxy, molecular beam epitaxy, MOCVD, LPCVD, PECVD.

Wafer Fabrication Technology: Introduction to MSI, VLSI, Manufacturing wafers, wafer scale integration, thin film deposition evaporation, sputtering, PCVD, laser ablation and ion beam deposition, insulator deposition, oxidation, kinetics, interface characterization, clean room technology and contamination control, impurities control, dielectric passivaion, oxidation and nitridation, basic patterning, photolithography and electron bean lithography, mask fabrication.

Etching: wet and dry etching, lift-off techniques.

Diffusion of impurities: Impurities control and junction of formation, drift transistors.

Other: Metalization, assembly and encapsulation, binding and ion implantation, sputtering section, packaging,

fabrication of IC PIC and OEIC, Design of linear IC, and semiconductor opto-electronic devices, process and device evaluation, economic aspects of fabrication industry, yield reliability and testing, scaling and limits to miniaturization, speed-power product.

Books Recommended:

  1. VLSI Technology – Simon Sze
  2. Fundamentals of Semiconductor FabricationPaperback – Gary S. May  and Simon M. Sze
  3. Introduction to Semiconductor Manufacturing Technology – Hong Xiao
  4. Handbook of Semiconductor Manufacturing Technology – Yoshio Nishi andRobert Doering

 

ECE – 425: Optoelectronics

3 Credits

 

Optical properties in semiconductor: Direct and indirect band-gap materials, radiative and non-radiative recombination, optical absorption, photo-generated excess carriers, minority carrier life time, luminescence and quantum efficiency in radiation. Properties of light: Particle and wave nature of light, polarization, interference, diffraction and blackbody radiation. Light emitting diode (LED): Principles, materials for visible and infrared LED, internal and external efficiency, loss mechanism, structure and coupling to optical fibers. Stimulated emission and light amplification: Spontaneous and stimulated emission, Einstein relations, population inversion, absorption of radiation, optical feedback and threshold conditions. Semiconductor Lasers: Population inversion in degenerate semiconductors, laser cavity, operating wavelength, threshold current density, power output, hetero-junction lasers, optical and electrical confinement. Introduction to quantum well lasers. Photo-detectors: Photoconductors, junction photo-detectors, PIN detectors, avalanche photodiodes and phototransistors. Solar cells: Solar energy and spectrum, silicon and Schottkey solar cells. Modulation of light: Phase and amplitude modulation, electro-optic effect, acousto-optic effect and magneto-optic devices. Introduction to integrated optics.

 

Books Recommended:

  1. Electrochromism and Electrochromic Devices – Paul Monk, R. J. Mortimer and D. R. Rosseinsky
  2. Optical System Design – Robert Fischer, Paul R. Yoder, Biljana Tadic-Galeb

 

CSE- 331: Computer Architecture

3 Credits

Information representation and transfer; instruction and data access methods; the control unit: hardwired and microprogrammed control; memory organization, I/O systems, channels, interrupts, DMA. Von Neumann SISD organization. RISC and CISC machines. Micro programmed vs. hardwired control unit. Memory System Design: Cache memory; Basic cache structure and design; Fully associative, direct and set associative mapping; Analyzing cache effectiveness; Replacement policies; Writing to a cache; Multiple caches; Upgrading a cache; Main Memory; Virtual memory structure, and design; Paging; Replacement strategies. Pipelining: General consideration; Comparison of pipelined and nonpipelined computer; Instruction and arithmetic pipelines, Data and Branch hazards. Multiprocessor and Multi Computers: SISD, SIMD, and MIMD architectures; centralized and distributed shared memory-architectures; Multi-core Processor  architectures. Input/Output Devices: Performance measure, Types of I/O device, Buses and interface to CPU, RAID. Pipelining, Pipeline Hazards. Parallel Processing.

Books Recommended:

  1. Computer Architecture and Parallel Processing – K Hang
  2. Computer Organization and Architecture – W. Stallings
Content